tensile strength In A Sentence

Learn how to use tensile strength in a sentence and make better sentences with `tensile strength` by reading tensile strength sentence examples.

• Again, relatively high tensile strength may be accompanied by very poor compression characteristics.
• The safe tensile strength of Portland cement concrete would be something like one-tenth of its compressive strength, and might be far less.
• Properties determined by mechanical testing, such as yield strength, ductility, ultimate tensile strength, hardness, bendability, impact strength, etc.
• When tensional stresses stretch a body or layer of rock such that its tensile strength is exceeded, it breaks.
• But the quality of the rock wool quality can vary widely, heat preservation function good density low, the tensile strength is also low, durability is poorer.
• Since an arbalest was much larger than earlier crossbows, and because of the greater tensile strength of steel, it had a greater force.
• A "'tensometer "'is a device used to evaluate the tensile properties of materials such as their Young's modulus ( i . e . the degree to which they stretch under stress ) and tensile strength.
• Over time, this webbing loses its tensile strength and can be removed.
• Similarly when split into thinner substances kangaroo retains considerably more of the original tensile strength of the unsplit leather than does calf.
• Full details of the environments and tests are tabulated together with details of the specimens such as tensile strength, proof stress and composition.
• Tensile strength represents the ability for a geomembrane to resist tensile stress.
• Wires are used to provide tensile strength.
• They used collagen, a protein of great tensile strength and ideal as 'scaffolding ' for tissue growth, to hold the valve tissue in shape as it grew into one-inch disc-shaped valves.
• The results show that beam offset can greatly affect the macro performance of Laser tailor-welded weld , then affect the cupping Test value and tensile strength unconspicuous.
• The melt viscosity and tensile strength of lithium ionomer increased with the sulfonate content increasing.
• No liquid tensile strength is needed to pull the liquid up.
• Neoprene A synthetic rubber material that offers excellent tensile strength.
• FRP or GRP bars have relatively higher tensile strength but lower stiffness, so that elastic deformability comparable to the plastic deformability ( ductility ) of steel reinforced structures.
• Ceramic materials are usually stress concentrators, decreasing the toughness further, and reducing the tensile strength.
• Further, the funicular cord, known to be highly elastic and with a high tensile strength, is made of thicker hyphae than the rest of the funiculus.
• The effects of preforming duration, preforming pressure, extrusion die's geometry size and content of lubricant on the extrudate's tensile strength were studied.
• Tensile strength corresponds to the maximum tensile stress that may be sustained by a specimen.
• Nor did its low tensile strength help either.
• If steel is not properly deoxidized, it will have reduced various properties such as tensile strength, ductility, toughness, weldability, polishability, and machinability.
• Intermediate annealings may be required to reach the required ductility to continue cold working a workpiece, otherwise it may fracture if the ultimate tensile strength is exceeded.
• If the paper tape tension over its tensile strength break occurs.
• It will have, when freshly burned, a specific gravity not lower than 3.15, and briquettes made from it and kept in water will possess a tensile strength of 400-500 lb per sq.
• Flexible tanks can be made of high-tensile strength polyester fabric, with elastomer or plastomer ( nitrile ) coated on both sides.
• It would appear, however, that the finest " wild " Para rubber as a rule possesses greater tensile strength than the " plantation " rubber.
• Addition of fibrous materials can also increase the tensile strength.
• The effect of steel bar diameter, reinforcement ratio, concrete tensile strength and cohesive strength between concrete and steel bar on cracking interval and width are analyzed.
• It was found that tensile strength, pendulum hardness of the latex film cast from hybrid emulsion increased and water resistance became better with increasing the content of MMA.
• The indoor lab test results showed that mineral admixture brucite fiber reinforced concrete can improve the flexural tensile strength of concrete.
• Since the late 1970s, further types of carbon fiber yarn entered the global market, offering higher tensile strength and higher elastic modulus.
• Some engineer's vises marketed as " Homeowner Grade " are not made of steel or cast iron, but of pot metal or a very low grade of iron, typically with a tensile strength of under 10 ksi.
• Because business card printing and membership card when paper toilet roll rotation to drag, high tensile strength can guarantee that the Web is not draggle .
• "' Spinnability "', sometimes referred as "'shear spinnability "', can be defined as the ability of a metal to undergo shear spinning deformation without exceeding its tensile strength and tearing.
• Furthermore, the paper also analyses the statistical parameter of axial compressive strength and axial tensile strength, give the standard value of each strength.
• While they are often significantly more expensive, they can give a water proof material that has useful tensile strength.
• The wire was required to have a tensile strength of 89 tons per sq.
• The texture evaluations of restructured meats are measured by texture profile analysis (TPA), expressible water percent, tensile strength and puncture test.
• Through the assumed moving direction of the plow chain, the maximum pull point is determined, the tensile strength of the plow chain is checked, the safe coefficient of the plow chain is obtained.
• For testing the tensile strength and flexure strength of wire.
• How can I increase the tensile strength to the product
• The tensile strength, modulus of elasticity(MOE) and hardness of Pinus massoniana fibers were determined by using zero-span tension and nanoindentation technique.
• The result is fibers with higher specific tensile strength than steel.
• Bamboo also has a tensile strength that rivals that of steel,".
• PU constructing joint sealant material with superior elongation and tensile strength.
• It's difficult to find tensile strength in a sentence.
• I produced polyisoprene latex, no proteins, no solvent, no ammonia odor, safety and environmental protection, and mechanical stability, high chemical stability, high tensile strength.
• Light, high tensile strength fibres confer stiffness and strength to a polymer resin that binds them into a rigid three-dimensional form.
• The report cited crumbling brickwork, rotting window frames and rusted steel beams with the tensile strength of a chocolate chip cookie.
• Thus the bead must have high tensile strength.
• It has a tensile strength, a dynamic expression.
• Polymethyl methacrylate shows a good mechanical strength, tensile strength and hardness and is easy to polish.
• A normal-size fiber for European shotcrete ( 1 mm diameter, 45 mm length-steel or plastic ) will increase the concrete's tensile strength.
• Glass fibers have a tensile strength stronger than steel, but bulk glass usually does not.
• For grinding of middle and high tensile strength metal , such as carbon steel , alloy steel , hard bronze, forgeable cast iron , ect.
• Concrete has almost zero tensile strength without steel reinforcement.
• But it is difficult and expensive to work up into various forms. Concrete has been avoided for making beams, slabs and thin walls, just because its deficiency in tensile strength doomed it to failure
• The cross section area was decreased due to corrosion attack in decarburized region, resulting in the tensile strength reduction.
• The lower finish cooling temperature, the shorter interlamellar spacing in pearlite colonies and the higher tensile strength and ductility are.
• Therefore, most glass breakage is due to tensile strength failure.
• Redcedar branches are very flexible and have good tensile strength.
• Her prose has nuance, tensile strength, humor.
• Mechanical properties of materials include the yield strength, tensile strength, fatigue strength, crack resistance, and other characteristics.
• *"'VERY SUPER DUPER HIGH tensile strength REALLY STRONG DELETE "': After evaluation of the argument above, the KEEPers are unpersuasive.
• Tensile strength of the alloys is high, making possible the drawing of very fine wire.
• Such properties in this case may include tensile strength, hardness, wear resistance and machinability among many others.
• Indium-tin alloys with high indium content have very low tensile strength.
• When testing metals, indentation hardness correlates linearly with tensile strength.
• At neutral, oxidizing atmosphere, the long-term use can still maintain good tensile strength, toughness and fiber structure.
• Hydroxyapatite(HA) whisker has lower dislocation density and higher tensile strength, therefore it could be used as toughening material in bioceramic.
• Bolting mechanical properties are tested by the tensile strength tester, impact tester and hardness testers, to guarantee the detect precision.
• Pipeline steel adopting the spicular ferrite owns the better properties of forming and anti corrosion for its low ratio of yield strength and tensile strength and uniform microstructure.
• The resultant bond exhibits excellent tensile strength, but poor peel and shear strength.
• Well guess what is listed under 10 ^ 9 : " tensile strength of Inconel 625 according to Aircraft metal strength tables and the Mil-Hdbk-5 ".
• The tensile strength, impact strength, flexural strength, thermal properties and morphology of the composites were investigated.
• It's tensile strength and adhesion are practically off the charts.
• As the phase progresses, the tensile strength of the wound increases.
• Compared with raw material, the cup formed by the technology of warm forming has perfect metal flow lines and the body's hardness and tensile strength are g...
• The results showed that the tensile strength and elastomeric character of ionomers increased with the increasing of valence number of ions.
• The yield and tensile strength of the welded joints of the two kinds of materials increase under dynamic loading and prestrain condition that have little effect on the plasticity of structural steel.
• The tensile strength of the alloys is high, making possible the drawing of very fine wire.
• On this account it is usual to neglect the tensile strength of concrete in designing structures, and to arrange the material in such a way that tensile stresses are avoided.
• ENPs densify the sheet, thus increasing tensile strength and some other physical properties.
• MWNT's cross-sectional area offers an elastic modulus approaching 1 TPa and a tensile strength of 100 GPa, over 10-fold higher than any industrial fiber.
• To measure tensile strength and breaking elongation of single yard.
• In any case the result is a more ductile material but a lower yield strength and a lower tensile strength.
• If subjected to cold drawing afterwards, the fibers align further, increasing their crystallinity, and the material acquires additional tensile strength.
• Papercrete has also been tested for its tensile strength.
• As regards both tensile strength and ductility not only the quantity but the distribution of the graphite is of great importance.
• Think of a salt crystal glued to the platens of a tensile strength instrument.
• Its tensile strength is higher than that of steel.
• The silicone rubbers reinforced by MQ silicone resins had high transparency. The tensile strength of the silicone rubbers increased first and then decreased with increasing vinyl groups in MQ resin.
• The composites cooled inside the hot-press machine has lower void content and higher crystallinity and tensile strength than that in the nature-cooling condit...
• Ultimate tensile strength is the tensile stress at which the bolt fails.
• Chemical mechanism of rubber expansion in DME was analysed, and different rubber materials were selected to test the expansion, the tensile strength, the elongation at break, and the hardness.
• Such an alloy can be cast like ordinary bronze, but excels the latter in hardness, elasticity, toughness and tensile strength.
• In this paper, the relation of tensile strength, tensile modulus and breaking elongation of unsaturated polyester casting matrix cured at room temperature to curing degree was discussed.