subnet In A Sentence

Learn how to use subnet in a sentence and make better sentences with `subnet` by reading subnet sentence examples.

• You have a class C network, and you need to design it for 5 usable subnets with each subnet handling a minimum of 18 hosts each. Which of the following network masks should you use?.
• A matching network FOR the specified IP address could not be found. Please also specify a subnet mask and a cluster network.
• The clou of the fire wall technology is to creat a relatively safe subnet environment in the unsafe Internet environment.
• Today, IP addresses are associated with a subnet mask.
• As a subnet of transport network management in TMN, Optical fiber cable line Automatic Monitoring System(OAMS) plays an important role in the stable operations of communication networks.
• The number of usable subnets is therefore 1022 and the number of usable addresses per subnet is 62.
• Subnet directed broadcasts ( SDB ) may be used to overcome this limitation.
• This parameter would just be the smallest CIDR subnet size that contains both IPs.
• First, the IPs that have histories ( I checked every IP on the subnet ).
• IP subnetting and variable length subnet masks and why they are useful.
• The RFC 950 specification recommended reserving the subnet values consisting of all zeros ( broadcast ), reducing the number of available subnets by two.
• Most of the IP addresses are in the lower portion of the subnet.
• The identifier is only unique within the subnet to which a host is connected.
• Todd Lammle's approach to subnet masking was the work of a genius.
• The simplest solution to your woes is to put every user on the same subnet.
• Subnet mask is mainly used to define the network number, host number of IP address and divide one heavy IP network into several subnets.
• Every host in the LAN will have the same network address, broadcast address, subnet mask, and domain name because those addresses identify the network in its entirety.
• I would like to reply to the guy but he is behind a local subnet.
• This error message appears when the destination contains one or more bits set to 1 in bit locations where the corresponding subnet mask bit is set to 0.
• Subnet mask is a 32-bit address, IP address used to shield part of the difference between a network address and host address.
• In other words, it is the number of 1s in the subnet mask.
• Need to know subnet info.
• Wildcard masks are used in situations where subnet masks may not apply.
• Subnet masks are always used in conjunction with a base IP address.
• This DSS subnet capability is now a standard part of network operation.
• Subnet masks are also expressed in dot-decimal notation like an address.
• The key difference is that subnets can use the same point in the net multiple times and the indexing set of the subnet can have much larger cardinality.
• Subnetting issue, subnet mask settings, subnet number, host number, network number.
• The remaining bits after the subnet bits are used for addressing hosts within the subnet.
• OSPF was designed to support variable - length subnet masking ( VLSM ) or Classless Inter - Domain Routing ( CIDR ) addressing models.
• Classless routing which allows you to vary your subnet mask length for different network.
• The subnet mask is an octet that uses the number 255 to represent the network address portion of the IP address and a zero to identify the host portion of the address.
• For example a question asks for the subnet mask that would allow 62 host addresses.
• Private VLAN divides a IP subnet and layer 3 configuration.
• The Trojan sends spoofed ARP packets to gateways and other computers on the same subnet.
• To understand how subnet masks are used to distinguish between hosts, networks, and subnetworks , examine an IP address in binary notation.
• Subnet directed broadcasts are treated as normal network packets until processed by the final ( local ) router.
• In other words, there cannot be a bit set to 1 in the destination if the corresponding bit in the subnet mask is a 0.
• The IPv6 protocol runs per link, rather than based on the subnet.
• The subnet mask is used to figure out what network you're on.
• However, by convention a subnet on broadcast MAC layer networks always has 64-bit host identifiers.
• Given IP address 64.208.48.226 , please answer its broadcast address if the specified subnet mask is used?.
• A more natural definition of a subnet would be to require " B " to be a cofinal subset of " A " and that " h " be the identity map.
• But first, time to pick a new subnet and let sniff the dogs of war.
• A single router per subnet is elected to perform this querying function.
• The term " subnet mask " is only used within IPv4.
• All of the bits in the host address portion of the IP address are set to 0. Please enter a valid combination of IP address and subnet mask.
• The Master switch polls the network for all slave and Masterswitches in the subnet and displays a list of the switches in theStacking Services menu.
• Here is the list that comes with all assigned machine names, associated IP addresses, subnet masks, and admin passwords for these guys.
• The gateway address must have the same subnet mask as host devices.
• Check the subnet masks for consistency.