sheet glass In A Sentence

Learn how to use sheet glass in a sentence and make better sentences with `sheet glass` by reading sheet glass sentence examples.

• Other methods for making hand-blown glass included blown plate glass, crown glass ( introduced to England in the 17th century ), polished plate glass and cylinder blown sheet glass.
• - Sheet-glass is almost wholly a soda-lime-silicate glass, containing only small quantities of iron, alumina and other impurities.
• The composition of these glasses is very similar to that of sheet-glass, but for the ordinary kinds of rolled plate much less scrupulous selection need be made in the choice of raw materials, especial
• Key products involved are flat glass, float glass, Glaverbel glass, rolled glass, super white glass, ultra thin glass and sheet glass, such as tawny glass, blue glass and gray glass.
• An efficient and easy method and analyzed for measuring the warp of the precision sheet glass.
• Mainly using source material and so on pebble, ceramic tile, shellfish, sheet glass, beaded glass , after the cutting, carries on the creativity combination again.
• Methods: 7 species of standard strains Monascus fungi for preparing Hongqu were cultivated on carry sheet glass and observed and compared after pretreatment using the scanning electron microscope.
• The process of sheet-glass manufacture described above is typical of that in use in a large number of works, but many modifications are to be found, particularly in the furnaces in which the glass is
• Glass is one of mainstay productions in the materials of building, while sheet glass is most widely used.
• In a sheet-glass tank there is therefore a gradient of temperature and a continuous passage of material from the hotter end of the furnace where the raw materials are introduced to the cooler end wher
• Subsidiaries of Nippon sheet glass and others have also faced unrest.
• The fusion of sheet-glass is now generally carried out in gas-fired regenerative tank furnaces.
• This paper introduces several improved methods of producing sheet glass in botany, which are suitable for botanical experiment teaching in relevant specialties of universities.
• I shaped the basic boule on a cornmeal coated glass plate and preheated a baking sheet in the oven.
• She did this by tilting the glass and leaning the wine into the light one the white sheet of paper.
• According actual criterion, it ? ? s not considered of co - working between the main frame and glass sheet.
• This girl can find a handhold on a sheet of glass and she's as strong as any man I know.
• This sheet of glass covered the whole workspace of the desk.
• Dr John Bevis of London suggested, in 1746, the use of sheet lead coatings within and without the jar, and subsequently the use of tin foil or silver leaf made closely adherent to the glass.
• This sheet print is really too tiny to use unless you have rime to use a magnifying glass.
• "Le Grande Jatte " is now covered with a custom-made new sheet of high-tech glass, so non-reflective that it seems invisible.
• Other historical methods for making window glass included broad sheet, blown plate, crown glass, polished plate and cylinder blown sheet.
• For example, she suggest you take a used drier sheet and wipe off the glass on your picture frames.
• You can also place glass or a sheet of heavy acrylic plastic over the top of a raised bed to create a cold frame.
• The light passed through the supporting glass sheet into a very thin and nearly transparent photographic emulsion containing submicroscopically small silver halide grains.
• However, the multi language instruction sheet needed a magnifying glass to read.
• I looked up at a sheer sheet of glass and steel, one of the 1930s Rockerfeller buildings.
• The polythene foam sheet products are widely used in the packaging of the various products, such as domestic appliance, precise instruments, bike, luxury furniture, glass, luxury porcelain, and so on.
• Laminated glass is manufactured by bonding two or more layers of glass together with an interlayer, such as PVB, under heat and pressure, to create a single sheet of glass.
• The head of the stopper is fastened in a chuck and the peg is ground to the size of the mouth of the bottle by means of sand and water pressed against the glass by bent strips of thin sheet iron.
• Now, he's got to face someone even more critical and consequential than a silvered sheet of glass.
• Once off the bath, the glass sheet passes through a anneals without strain and does not crack from the temperature change.
• It literally looks like you've coated your car with a sheet of glass.
• They were tools welded together and then welded to a metal frame and topped with a sheet of glass.
• Meanwhile, because of its superior anti - impact and penetration performance, the multi - sheet laminated glass is of bulletproof.
• He creates a glass-like sheet with glucose and pectin.
• Drawbench sheet is placed between two clear glass , it creates a world of aesthetic.
• After they did this four more times I decided to try to outdo them, and got a sheet of glass ready.
• I used to back light a sheet of opache plexi glass to make a pit board.
• The tintype's immediate predecessor, the ambrotype, was done by the same process of using a sheet of glass as the support.
• Ah, cara, you are like a sheet of glass.
• Now you just place a sheet on the glass, press copy, and you have your copy.
• Or, lift the top and place a single sheet to copy on the glass.
• Other methods of producing hand-blown window glass included broad sheet, blown plate, crown glass and polished plate.
• The installation consisted of a wall of gerbera daisies pinned behind a single sheet of glass.
• Most likely using the same method they had shown before by using a glass sheet and laser pen.
• They also supply small metal clips to secure items between picture glass and a sheet of hardboard or thin plywood.
• Designed for handling glass, tiles, plastic, sheet metal and other non - porous material.
• It can be used on paper, foil, cardboard, cloth, leather, glass, mylar, acetate sheet, foam rubber, urethane foam, styrofoam and light metal sections.
• When you color both sides of an individual sheet they do give the appearance of stained glass.
• The sheet of glass is typically lubricated along the cutting line with a light oil.