plywood In A Sentence
Learn how to use plywood in a sentence and make better sentences with `plywood` by reading plywood sentence examples.
- The reverse is true if you cut plywood with a circular saw.
- The plywood sheathing on the roof is buckling and I think the top veneer has delaminated.
- Part of the reel is made out of very cheap plywood that is a little rough around the edges.
- Highly recommend these bits if you ever work with plywood.
- Within two years, phenolic resin was applied to plywood as a coating varnish.
- Using a table saw, cut the 8-foot piece of plywood into one long section that is 25 inches in width.
- Then the four inch wide plywood board split down the middle and the glue joint was totally in tact.
- Lim : Identify new market for sawn timber, plywood, BUSINESS TIMES.
- I plan to nail plywood to the floor boards to cover those gaps.
- They are pieces of plywood with a tablecloth covering them.
- Like little sheets of plywood.
- It's not as bad with plywood, but still, chips go flying.
- They are shipped to China and turned into plywood.
- I use this for cutting plywood panels for woodworking projects.
- This blade is a must if you're cutting lots of plywood.
- I have used it on all types of lumber, plywood and paint.
- Moreover, we use high quality raw materials, such as paulownia wood, poplar and pine, satin wood, chinaberry and plywood, which further guarantee superior quality of our products .
- Its operations also include packaging material, panels and sawn timber and plywood.
- The tables were police barricades with sheets of plywood on top.
- We don't just want to make a cube of pine 2x4s and cover it all with plywood and bee done with it.
- For plywood the teeth need to be closer.
- They sat on folding chairs around a plywood table, drinking brown beer until they had achieved a state of alcoholic bonhomie.
- Above, its transom is covered with plywood and nailed tightly shut.
- This garbage company was hired to replace my whole roof and all plywood underneath.
- To use one, place a reel on its side and then center it under a piece of plywood.
- However, other industries like Agro-Fruit, State Farming Corporation, Rehabilitation Plantations, RPC Kraft Paper, plywood industry, etc . are still provides a significant contribution to Kerala.
- I plan to build a plywood triangle version similar to the plywood bike for testing 'seat-head ' tube angles and wheel base changes.
- Which I did, out of six inch wide pieces of plywood which I screwed to the top of the sawhorses.
- Charles Eames is best known for his furniture _ the plywood chairs and chaise longue he did for the Herman Miller company.
- In the diagram it looks like plywood ties the slab and wall together which make me think termites.
- They are most often made by ripping the plywood at and then mitering it at 45 degree angles to create triangles with legs.
- Did not expect the mattress to be a like a plywood box with a thin pillow top.
- Having been informed that plywood is sufficient i will be making it as taught with plywood.
- They are the only supplier that always has fire rated plywood in stock for all our installations.
- The fixtures were then easily mounted onto the plywood.
- The cut was very clean and did not disturb the surface of the plywood at all.
- 00 for 4 cutouts, plywood charge, and it goes on.
- A bar is beginning to take shape among the exposed plywood and studs on the right.
- I have cut oak, poplar, maple, beech, MDF and oak veneered plywood.
- Weyerhaeuser's products include lumber, plywood and newsprint.
- I made a lathe stand from structural lumber and plywood.
- Oh and they keep hammers and nails right with the plywood too, handy eh.
- I was cross cutting plywood with my old Delta blade.
- The ceiling had a double layer of plywood, which would provide strong support.
- Some businesses hang on as the plywood goes up around them.
- This beastie is not only a guide, but it adds some rigidity to the plywood to eliminate the bounce.
- Wood - based products, such as plywood and chipboard, must also be treated with preservatives.
- Using this product is a bit like using a circular saw to cut a 8'x'4' piece of plywood with a guide.
- Gaoming Jiang points out that poplar-based plywood can be readily manufactured from monoculture poplar plantations and sold profitably.
- Plywood produced to " E0 " has effectively zero formaldehyde emissions.
- Use them to hold plywood to the horse.
- Rather, it can be plywood, MDF or hardboard.
- I have probably cut up 10 sheets of plywood and a similar number of doors.
- Paraclete core board can be board, plywood, horniness beaverboard, plastic board, glass.
- That painted plywood with art tacked to it is, well, tacky.
- If you are on two horses, and you have a sheet of plywood, it tends to bow.
- I wanted to pick up a piece of plywood but forgot that we were driving a compact car.
- It is topped with plywood or hardwood and finally surfaced with either vinyl or hardwood, depending on the preferences of the performers.
- Prajogo's Barito wants to branch out from its business of making plywood.
- The ramps screw into the plywood floors with short little screws.
- Built of plywood, telephone poles and plaster, the set has required constant paint touchups by a set crew.
- The Ardea had a deep sided, hexagonal cross-section fuselage, entirely plywood skinned.
- A sawhorse can also be used as the base for a portable work table by placing a sheet of plywood or even a door on top of two sawhorses.
- My only real complaint is that it won't rip 4x8 sheets of plywood.
- Cut a piece of plywood to a size that will accommodate the attic framing that surrounds the vent hole.
- I have used them a couple times for ripping both plywood and MDF.
- I had several vises on my bench that required matching holes in the plywood.
- I was sitting on the plywood.
- The GRP body was bonded to this chassis and plywood floorpan.
- I use this for light duty cutting of patterns in plywood.
- So I ended up using plywood and Sonotube.
- All lined up on plywood shelves as you walk through the front door.
- And also normally used in conjunction with plywood.
- Because there are so many types of computer desks out there, almost anyone with any woodworking experience at all can create one with a few tools and sheets of plywood.
- The first heavier than air machine to fly across the Atlantic Ocean, the Curtiss NC-4, was made from Haskelite -the plywood Haskell invented.
- It can be cementboard, chipboard or plywood.
- Even some years back, dance floors were only available in thick plywood only.
- -- Cornstarch can be used in adhesives, batteries, degradable plastics, dyes, plywood, antibiotics and chewing gum.
- By last Friday, the plywood on the front door was already loose.
- Because the floor is open, I recommend placing this on a piece of cement or plywood.
- For starters, my Hitachi C10FSH is not compatible with the mounts, unless I mount it on plywood.
- Most people kept their rooms, even though plywood replaced picture windows by Wednesday afternoon.
- Typical of Usonians, the walls are sandwich compositions of plywood and Ringle ) brick.
- There walls must be made of plywood.
- The price of plywood currently reaches US $ 600 per cubic meter.
- It was Gaboon plywood-skinned and built around a single spruce spar, with a leading-edge torsion box.
- Bamboo Ukuleles are constructed of solid cross laminated bamboo strips not plywood.
- Are you considering getting one of those free plywood boat plans.
- The putting holes are just plywood sprayed with glow in the dark paint.
- Down sid is that it is easy to damage plywood.
- Untainted pine, which can be used for plywood, sells for as much as $ 50 a ton.
- Subfloors above grade ( above ground ) typically have a plywood subfloor.
- There is sheet linoleum of some kind already there, glued to the plywood, 20 years old.
- Good choice for cutting openings in plywood cabinets when you want a decent looking cut.
- For my own uses, my biggest problem is in cutting down plywood into manageable and straight lengths.
- These woods include cedar, cherry, eucalyptus, fir, plum, plywood or spruce.
- Instead, I had my husband cut a sheet of heavy plywood in half and I'm using that for a top.
- The wings had solid spruce spars, and consisted of a centre section and outer panels, with spruce and plywood ribs.
- A routine use of the DeWalt DC390 will be to cut thin stock such as plywood.
- They should put a huge sign up stating no wood cutting available for anything except plywood.
Similar words: Plyers, Plymouths, Plymouth Colony, Plysia, Plymouth, Plyometric, Plying, Plymouth Rock, Ply, Plynlimmon, Plyer, Plyboard, Plympton, Plygain, Plywoods, Plyometrics, Plywood