nut and bolt In A Sentence
Learn how to use nut and bolt in a sentence and make better sentences with `nut and bolt` by reading nut and bolt sentence examples.
- No surprises, no questioning, everything planned to the last nut and bolt.
- It's difficult to find nut and bolt in a sentence.
- I can see every nut and bolt in the entire project.
- That nut and bolt is the same height as small children's head and face area.
- The battery was somewhat unique in that it had M6 nut and bolt posts.
- I have an extensive SAE nut and bolt center but no metric.
- On a swing bridge I have observed hex nuts appox 2ft diameter, 1ft depth and approx 1ft bolt diameter-does anyone know of much larger nut and bolt combinations.
- Remove the lower suspension arm nut and bolt from the axle bracket.
- But after the directive was issued, he said, Boeing engineers redesigned the nut and bolt to include a cotter pin, which further ensures it will not come loose.
- She received it and could not and would not eat it, she found a metal nut and bolt in her salad.
- The hinge is an actual nut and bolt assembly of good quality.
- The components of the jig are all made of plastic except for the hinge pin and a nut and bolt.
- This place is by far the best nut and bolt store in AZ.
- On assembly every nut, bolt and hole lined up great.
- A rubber gasket seal is used between a clamp nut of a barrel screw bolt and the outer wall of the barrel body of the utility model.
- Only issue I can see is the galvanized bolt and nut will probably rust down the road.
- We were seen right away, and weren't charged for a new bolt or nut.
- It's also extremely wide and should be able to take on just about any nut or bolt.
- How can someone, hour after hour, day after day, year in and year out, tighten approximately the same nut to the same bolt and not go mad?.
- "I always equate it to a nut and a bolt.
- Install the bolts so the bolt heads are above the table and the nut and washer is below.
- And if you size a nut, or a bolt, you have to flip it over to see the other side constantly.
- This standard is applicable to hot rolled round carbon steel bars for manufacturing screw nail, screw nut, screw bolt and rivet of cold upset forging or hot upset forging.
- My FIL used a large bolt, washer and nut to allow it to safely sit lower than its lowest setting.
- Many bolts are held fixed in place during assembly, either by a tool or by a design of non-rotating bolt, such as a carriage bolt, and only the corresponding nut is turned.
- The torque value is dependent on the friction produced in the threads and under the torqued bolt head or nut and the fastened material or washer if used.
- The only issue I have had is two wrong bolts, a missing bolt, a missing washer, and a missing nut.
- A bolt and a nut together can be used to fasten objects to each other.
- My company mainly manages the bolt, the nut, the spring nut, the bolt, the gasket, the tooth stick, the expansion of metal screw, the heterogeneous pressing part, non-tender, hardware tool and so on.
- The hardware used to do this is non standard and consists of a plastic nut that goes around a bolt.
- The trick is to just drop that nut in the slot and let the bolt threads find their home.
- The bolt, nut, cotter pin and rivet are all common fastener.
- Hexagon bolts and nuts, hexagon socket head cap screws, thread bar, carriage bolts, Nylon lock hex nut, flat washer, fish bolt set, standard fasteners etc.
- The top of the bolt is secured with a flat head screwdriver and underneath is a wing nut style nut.
- Bolt is nut and.
Similar words: Nutation, Nuthouses, Nutty, Nutritionally, Nuttily, Nutwoods, Nut Tree, Nutriculture, Nuttings, Nutcake, Nutro, Nuttery, NUT, Nutgrass, Nutlet, Nutritions, Nutters, Nutcracker, Nutate, Nutcrackers