jig In A Sentence
Learn how to use jig in a sentence and make better sentences with `jig` by reading jig sentence examples.
- I actually built a jig years ago.
- I used this jig to cut four skirtboards for my staircase.
- If it does you will end up with a hole in the jig.
- Female Scottish highland dancers performing the national dances and the Irish jig also curtsey ( at both the beginning and end for the national dances and at the end for the Irish jig ).
- This clamp is absolutely a necessity if you're using the Kreg pocket jig system.
- Very nice jig and very easy to use.
- By the use of equipment for the China University of Mining and provided CNC Room sieve air jig, indicators of control is very stable.
- I use it in a jig for cutting mortises for face frames and frame and panel doors.
- I also use the blade with the INCRA box joint jig on the table saw.
- My old jig saw would have vibrated to a halt and possibly snapped the blade with such a maneuver.
- It was very easy to secure the jig onto the end of a 2x4.
- I love Bosch, I bought their top of the line jig saw and nothing performs close to it.
- Since for a jig saw you only need a machine that moves the blade up and down right.
- The jig is up, Donald.
- I have had my eye on the Delta Tenoning jig for quite a while.
- Once they turned her on to Harry, the jig was up.
- Jig already comes with a square bit.
- When Hamed finally reached the ring, he did a jig on the apron and then somersaulted over the top rope.
- The Black and Decker is now permanently dedicated to my dovetail jig.
- Meanwhile, jig only wants to make his way home, enjoy a good meal, and have a long sleep.
- Then if the material is a little off of the jig on one side or the other, you'll be able to see it.
- The dyeing residues of pad dyeing, over flow and the end vat of jig dyeing could be decolorized and recycled by coagulant sedimentation.
- Pocket Hole jig System so I gave it shot.
- If you own a Kreg jig, this clamp is a must have.
- This is a superior dovetail jig in most every way.
- This time, the two jig rods got hit on the way down.
- This jig does everything it P C says it will.
- So far the performance of this jig has been excellent.
- I was doing a mental jig when Christopher put that beech in her place.
- All in all this is a great jig, typical incra high quality and great results.
- The lush wetland shrivels to a jig-saw landscape of dried sun-baked mud.
- I was a little dissapoited by the power of the jig Saw.
- I'm very happy that I purchased this jig, as it works great for drilling pocket screw holes.
- The farandole bears similarities to the gavotte, jig, and tarantella.
- I have to say that I was hesitant to buy the Delta tenoning jig after reading the reviews.
- The paper mainly discusses the processing techniques of connecting rod and its jig design.
- Jig zone jigsaw puzzles and the music sounds so great.
- Fact is, very few fishermen use the jig without live bait.
- I looked very hard at this, the Kreg system and the HF jig.
- The jig is up for Trump.
- A finger joint jig is a table saw setup that cuts slots in wood that form box joints.
- This is one slick little jig.
- Over all it is much better than shop make jig, set up is easy, and well worth the money.
- Just each Sing a ma jig is tuned to a different note so it sounds like they are singing together.
- In allusion to resultant milling of circumference distributing and circumgyratetion axes multi-angles surface, design and application for drum of curve knife-Edge milling jig was good for imitating.
- Bought these to work with the Kreg jig system.
- Quality pieces reminiscent of those nice, heavy duty 1950s and 1960s jig saw puzzles.
- I purchased these to round out my Kreg jig clamp arsenal.
- After setup, I created a jig for clapboards that will be installed on my house.
- As jig learns more about the world around him, he also begins to learn more about himself.
- I recently purchased the Delta 34 183 Tenoning jig as an accessory to my Delta Unisaw.
- I recommend you step up to the Kreg K4MS jig Master System.
- A must for any kreg jig owner.
- When the real male stripper arrives, the jig is up and Olivia is mortified.
- This tenoning jig is very robust and easy to use.
- I could not be more happy with this dewalt 8 volt jig saw.
- Ravensburger puzzles are what they are first rate jig saw puzzles.
- This still leaves a wide margin between the jig and the blade.
- Most of the time, like most Kreg jig users, I try to hide the screws where they won't show.
- I bought this jig out of personal preference.
- This jig is good for basic joints and has served me well.
- This is easily the most versatile doweling jig on the market.
- Some of the accessories are great, such as the scissor sharpening jig and the knife sharpening jig.
- I should of used a regular jig saw.
- In any case, the Kreg jig is worth the price paid and I certainly recommend the thing.
- They stay perfectly flat, and that's beautiful whether you sharpen by hand or use a jig.
- I had purchased the metabo top of the line jig saw.
- I use them in t slots other than my Build It jig and they work great.
- This is not my 1st jig saw.
- If you get someone competent on the line, you want to dance a little jig.
- David is an undercover FBI agent and needs to find a wife in a hurry otherwise the jig is up.
- I have a Bosch contractors saw, and with the jig it cuts like a far more expensive saw.
- Jig isn't sneaky with it.
- Hit hfu ury jig 7rru uf.
- The purpose of the drilling jig is to hold a Forstner bit in place, at a 90?angle while drilling 3 cm pit hole.
- The jig includes 3 heavy duty plastic jig pieces with steel inserts for the drill.
- But I have used this type of jig before as well and it is great.
- This jig is so easy and so fast to use and learn.
- It is easy to keep them on the shelf with the pocket hole jig.
- The most imitated jig saw on the market.
- From one death trap to another, jig has already decided that death is his destination.
- Chinese leaders may act retrained and annoyed, but behind closed doors they are dancing a jig.
- To spend more on a jig saw would be a waste of money.
- The clamp holds the jig firmly, without marring the door.
- Vise grip action hold the jig tightly for drilling.
- I have used BOSCH jig saws and tools for years.
- This is a well built and quality jig.
- The perfect setup in my opinion is the Kreg K4MS jig Master System and the Kreg R3 Jr.
- This connection landed her a role in her first Broadway performance in 1924, George S . Kaufman and Dawn Powell's " jig Saw ".
- If you are in the market for a jig, this is the one you want to get.
- The jig is nearly up for Trump and his pals.
- First time I have ever used a jig for this purpose and this worked great.
- A great sized bit to get into tighter spaces when using the Kreg jig.
- I did make a plywood jig that I taped down on the tile and filled with water to start the cut.
- The review classifies Dowelmax as " the best dowelling jig ever made ".
- This jig saw is extremely powerful, durable and packed with great options.
- I bought the Kreg KJMICRODGB jig Micro Drill Guide System to complete my pocket hole set.
- Jigg, or jig, is a very important factor, as will be seen hereafter.
- I also have the Kreg Pocket Hole jig which is an amazing jig as well.
- In ancient times, residents of the town of Taranto, upon being bitten by the large local Wolf Spider, " Lycosa tarentula ", would promptly do a long vigorous dance like a jig.
Similar words: Ji