drill In A Sentence
Learn how to use drill in a sentence and make better sentences with `drill` by reading drill sentence examples.
- Turns your Dremel into a real drill bit type of drill, and holds up pretty well on the small bits.
- I received the drill, contractor bag and a set of spade bits for $99.
- Be aware, that these are also VERY aggressive bits and will pull you drill in if you're not careful.
- Hammer drills have more power to it as an impact drill will provide you with more torque.
- A Table Saw, a Lathe, a drill Press, a Disc Sander and a Horizontal Drilling Machine.
- This tool also can drill like an ordinary drill, making it two tools in one.
- But the drill chuck is machined a bit sloppily, something you'll notice only in very detail work.
- Dremel drilling was a pain in neck when you were using different size drill bits.
- The drill works great too used it in hammer drill mode to attach some stuff to the basement wall.
- Good Lord, does this drill have power.
- The key here is not to do the man thing and grab it and a drill bit and start going.
- The center drill bit requires a small Allen wrench that I have in hand.
- Maybe if all you are drill is soft wood, maybe.
- The drill has more torque than any of its 18 volt competitors and drills long screws with ease.
- This is not an all day, big job drill unless you expect to keep changing the batteries.
- Drill bits are still sharp.
- You know the drill by now.
- The drill has a lot of power but is a little bulky.
- This drill's grip is much slimmer and I'm so very happy about that.
- The drill has a very bad wobble to the chuck.
- China and silver looks nice, but a drill and accessories fixes things for a lifetime.
- I love the accessories available for this drill.
- These are a great addition for my impact drill box that goes to every job I'm on.
- It was only $15 but I was left with 4 toes with burns on them from the drill and file.
- A fantastic , well built, powerful cordless drill.
- Unfortunatly, it does not fit the Delta DP300 bench drill press.
- I will never own another drill without one.
- This is a nice kit for your cordless drill.
- I needed more run capacity for my Bosch impact and cordless drill.
- Bosch seems to make the best drill bits I've ever purchased.
- The switch isn't a small trigger as on a conventional drill.
- If you're doing serious work in wood or metal and can only own one drill, this should be the one.
- The hammer drill is the same as the 18v version, but it is lighter as well.
- I was actually a little disappointed in the power of the drill.
- This right angle drill attachment fits into very tight spaces.
- I have a black and decker cordless drill that my Dad gave me as a gift.
- Be sure to use a carpenter's level to align the screws, and pre drill your holes if going into wood.
- But I haven't yet found an adapter that converts a hex chuck to a regular drill.
- Also with my G1023SLWX I did not have to drill any holes.
- I grab the bag and the drill and charger is already inside it.
- Overall this is still a great drill.
- This is an all around great performing drill.
- After a few screws something must of stripped in the drill and I lost most of the torq.
- The key is repetition and perfecting each drill so it becomes natural and automatic.
- The length of these drill bits are 6.
- I've been trying to sharpen my drill bits with this tool and I'm not as happy with it as I thought.
- The bottom is open so you can holster your drill no matter what you have chucked.
- The cases for the bits are badly designed the drill bit holders especially.
- Fits in a Dremel or drill.
- Working inside cabinets etc I no longer need a droplight, the drill light is perfect.
- This drill tightens by hand and you hear a reassuring click when it's locked it.
- I drill 18 holes down the middle of a six foot block in a matter of minutes.
- 6v drill I've had for about 10 12 years.
- Maybe it was my fault, but I've used drill presses for years and never had this happen.
- She knows the drill and starts us off with a glass of prosecco.
- It's big enough to hold jobbers length drill bits.
- We use this drill constantly.
- I was in the market for a small compact drill to add to my tool inventory.
- These bits are very effective when using on hard to drill metals.
- My only issue with the set is with the thinner drill bits.
- These are just what I needed to compliment my purchase of a drill driver.
- Good drill bits, nice set.
- They are drill bits, so what can I say, except that they work and have a nice case.
- All my cards have chips so was stuck doing this fire drill to use card.
- If you're looking for a durable and more powerful drill Driver, the Bosch DDH181 is a great option.
- HPB18 OPE 18 volt battery pack, after being charged, runs my drill just fine.
- Use these to scrape off lime buildup on glass and tile, remove sticker you know the drill.
- I have been using the drill and driver for a few years now and it is a great tool to have.
- And drill and impact, like all SDS drills.
- In summary, this is a good drill for rough work framing, building a deck or an outdoor planter.
- And why just the four drill bits when there are a couple of more sizes available for this system.
- Take some time to practice with it if this is your first cordless drill.
- They make drilling effortlessly when compared to titanium drill bits.
- There's a clip on the drill for hanging from your belt, or on a tool wall.
- My previous drill was an old black and decker 12v that I had had for 9 years.
- Friend of mine bought this drill from the local Dewalt dealer.
- I purchased this rotary hammer to drill holes in my concrete pad for anchoring posts.
- Hands down then best drill I've ever used.
- In fact I bought Skill AC drill for the rough stuff.
- Hammers rulers electric drill and more all fits.
- 5 makita drill motor,its the same size but heavier.
- Something that my prior Sears branded cordless drill had issues with.
- The Electric drill was exactly as described on the ad and it was received very fast.
- Guess I will skip the batteries and get another brand of drill.
- Out of the box the KR Tools Xtreme drill and Driver bit set looks quite impressive.
- To boot, as she was removing the paint from my first visit, she cut me with the drill.
- As a custom deck builder and remodeler, I run these drill hard all day long and they hold up great.
- A hammer drill would have taken forever, and not really been able to drill that deep efficiently.
- Using the drill the next day, the same part broke.
- Also, I still need to drill one more hole for the top adjusting T wrench.
- Don't expect these to turn your drill into an impact wrench.
- I needed one bit to drill some holes in my concrete driveway.
- The other drill was a real dog.
- I have not used the impact drill from the kit yet.
- I have 12 holes to drill in porcelain tile.
- The high speed range moves at a surprisingly fast rate again considering the drill size.
- They seem to drill much faster than regular spade bits and leave reasonably clean exit holes.
- I use this drill around the house no real big projects just the ordinary home maintenance stuff.
- I have uploaded a picture showing the adjustable stop rod that came with my drill.
- I broke the tip off the original drill bit after about a year of use.
Similar words: Drivel, Dried Apricot, Drinking Cup, Dribbling, Drilling Platform, Dripstone, Dried, Drinkwater, Drink Down, Drill Bit, Driver's Seat, Drifting, Drishti, Drida, Drift Away, Driving Force, Driveled, Drift, Drive Out, Drivable