cylinder head In A Sentence
Learn how to use cylinder head in a sentence and make better sentences with `cylinder head` by reading cylinder head sentence examples.
- The spark plug must form a good seal inside the cylinder head to avoid leakage of without the high-tension current shorting-out.
- How can a brand new cylinder head not even last 6 months, for a car that has been well maintained.
- QED bought the license to officially re-produce the Twin Cam's cylinder head.
- Hydraulic tappets require more complex and more expensive cylinder head design.
- I decided to install a fully reconditioned 1950 cc. engine from MGOC Spares, fitted with the unleaded cylinder head.
- The difficulties of machining, and maintaining, a monobloc cylinder head were always a severe drawback to it.
- Scrutineers later disqualified the car however, because it had been fitted with undersized cylinder head valves.
- $500 for cylinder head maintenance ( valves, springs, etc .).
- The engine block and cylinder head were cast in one unit.
- Early models used two valves, one in the cylinder head and a second embedded in the piston itself, counterweighted to open at the end of the stroke.
- A new lateral casting process was introduced to produce YC 6 M cylinder head.
- The cylinder head was removable and bolted with four bolts on the crank case.
- This engine utilizes a cast iron cylinder block and an aluminum cylinder head.
- Through reliability analysis, F 3 is the best proposal operation requirement of current cylinder head.
- Intake and exhaust valves are also increased in size along with other changes to the cylinder head.
- When replacing spark plugs take great care not damage the threads in the cylinder head.
- A fuel injection valve (17) is mounted to an upper surface of the cylinder head (20).
- It was fitted with a new aluminium cylinder head gear-driven dual overhead camshafts.
- You quote me 3 different labor fees for the same kind of work, cylinder head replacement.
- There will always be some compressed gas remaining in the cylinder and cylinder head spaces at the top of the stroke.
- It's difficult to find cylinder head in a sentence.
- A bolt is fastened through the bush to thereby fix the rocker shaft on a cylinder head.
- Each cylinder has a unit injector fitted between the valves in the cylinder head.
- The Endura-DE engine features a cast iron block and indirect injection style cylinder head, which means there is a combustion chamber built into the cylinder head.
- Exhaust and inlet manifolds were both on the same side of the engine block ( thus not a crossflow cylinder head design ).
- The cylinder head and gasket was bad and was replaced with new ones.
- Every cylinder head has four overhead valves, which are activated by tappets, pushrods and rocker arms.
- It has a cast iron engine block and aluminum DOHC cylinder head.
- The relationship between calcium stearate and sand core as well as casting quality of cylinder head of diesel engine for example is analyzed.
- The revised exhaust manifold actually became part of the cylinder head casting itself.
- Like all " Family 1 " engines they feature a toothed belt driven valvetrain, a cast iron engine block and an aluminum cylinder head.
- In addition, the oil boss located at the end of the cylinder head on the LA engine was left undrilled, as it was no longer needed.
- Research has believed that veining in admission and exhaust passage of diesel engine cylinder head may mainly be caused by crack of sand core occurring in high temperature phase change expansion.
- The side-valve engine was composed of an aluminium crankcase, cast iron cylinder block and cast iron cylinder head.
- The cylinder head is attached to the block with high - tensile steel studs.
- Maintenance: Both cylinder bore and cylinder head valve guide tube can be repaired by resisting.
- The wand allows auto repair technicians inspect valves for damage without pulling the cylinder head.
- The cylinder head was a compact design with round intake and exhaust ports.
- The engine cylinder head made by vermicular graphite cast iron is not easy to control because of many factors influenced on the production quantity and its optarion limits are very narrow.
- Heavy duty gas engines may employ precombustion chambers in the cylinder head.
- Combustion instead took place in a separated combustion chamber, the " vapouriser " ( also called the " hot bulb " ) mounted on the cylinder head, into which fuel was sprayed.
- Two summers ago, we had to replace the cylinder head gasket on Rosy's engine.
- The Volkswagen engine used an enlarged Chrysler-designed cylinder head and intake manifold and produced and.
- The cylinder head has an intake manifold and an exhaust manifold attached to the corresponding ports.
- I agreed to have the cylinder head repaired, waited and waited and no follow up.
- The engine was slanted to the left, and utilized a crossflow cylinder head.
- Two cylinder-head designs were developed to improve the 351W head.
- The engine also features a reed valve that pulls oil from the cylinder head thereby reducing oil carry-over to the air box.
- The cylinder head is cast iron.
- The cylinder head has been carefully machined to increase air-flow.
- The cylinder head is a single piece made of low pressure chill cast highly heat resistant light metal alloy.
- The relationship between calcium stearate and sand core as well as casting quality of cylinder head of diesel engine for example ...
- A numerical simulation is presented for 3 - D filling progress of engine cylinder head casting.
- The most common cylinder head types are the hemi, wedge, and semi - hemi.
- With the cylinder head off, the pistons were cleaned of any carbon deposits using a wire cup brush on a drill.
- After filling a cylinder, a seal is welded onto the cylinder head.
- This engine ran a seven-port non-crossflow cast-iron cylinder head.
- The cylinder head is heavily finned for strength.
- The conclusions are of benefit to the improvement of the diesel engine with integrated cylinder head.
- This damper consists of cylinder, piston rod, piston head, orifice, silicon fluid and pressure adjustment valve.
- White smoke from the tailpipe can indicate water or antifreeze in the engine cylinder, meaning you have a failed head gasket.
- Like the cylinder block, the head is made from either cast iron or aluminum alloy.
- This equipment specially used for engine cylinder block and head of water jacket and oil leakage of tao detection.
- The magnet consists of a hollow steel cylinder fitted with a scale and lens as described above, and is suspended by a long thread of unspun silk, which is attached at the upper end to the torsion head
- Then you pull off the sardine like lid, and then screw down the pump head onto the grease cylinder.
- 'Golden ' Eagle head gasket is an OEM and processing units to accommodate the larger diameter cylinder hole on a larger scale.
- The whole stage T, carrying both spectrograms, can be moved from right to left on the steel cylinder Z, by turning the head K, on the axis of which is a pinion that gears into a toothed rack attached
- The "'L20ET "'is a turbo engine developed from the L20E . It is a 12-valve, six-cylinder, fuel-injected engine with a single chain driven cam, turbo ( non intercooled ), and a non crossflow head.
- The articla I saw had quite a number of wide head multivalve headed motors and manny of them had more than one sparkplug per cylinder.
- A highand low-pressure cylinder are cast together, and the piston-rods belonging to them are both coupled to one cross-head which is connected to the driving-wheels, these again being coupled to other
- The cold head consists of a two-stage cold head cylinder ( part of the vacuum vessel ) and a drive unit displacer assembly.
Similar words: Cylinder Shaped, Cylinder Grinding, Cyl., Cylin, Cylonian, Cylindrical, Cyla, Cylindriform, Cylindricity, Cylindrophis, Cylons, Cylindric, Cylindroid, Cylindro, Cylinders, Cylindered, Cylindroconical, Cylindrica, Cylindraceous, Cylinder Block