crosscut In A Sentence
Learn how to use crosscut in a sentence and make better sentences with `crosscut` by reading crosscut sentence examples.
- It's like a crosscut of the actual stone.
- The advantages known with the proven 'double crosscut, 'such as less power requirement and lower noise level, are still retained.
- On the side, bacon ranch crosscut fries very good flavor and crispy ness.
- He went away with a crosscut saw in hand.
- I am using a crosscut sled to cut my cabinet bottoms and stretchers to exact length.
- I have used a home shredder for several years, first a strip shredder then a crosscut one.
- I decided to try the bottomless crosscut ribs.
- He tries prevent Irma from seeing his predicament, but ends up freaking her out after he grabs a crosscut saw to try to get it off.
- And Montgomery Ward sent her a bathtub and a crosscut saw.
- The crosscut limit is something like 27 inches.
- The primary maintenance carried out on crosscut saws is sharpening, which requires a shop and a highly skilled filer.
- As a crosscut saw is a two-man saw, each cut must be made with a pair of teammates.
- Details of Titanic's floors and a crosscut of the ship are on a four page spread pullout.
- Crosscut's stated purpose is to " produce journalism in the public interest ".
- Western burger combo with crosscut fries.
- That's the ultimate crosscut blade.
- It was served with 3 small crosscut baguette slices.
- He works by cutting down trees with either an axe or with the help of another lumberjack and a crosscut saw, as opposed to the modern chainsaw.
- Using crosscut saw, cut through the remaining vertical (mullion) and horizontal (transom) frame members and remove.
- You can use a machine to crosscut wood.
- Trees were cut with steel axes until about 1870 when the two-man crosscut saw was introduced.
- This crosscut blade is a great performer.
- Also ordered a large crosscut fry and it had about 7 fries in it.
- So far the two blade types I've used, scrolling and crosscut, have worked fine.
- General woodworking usually requires a crosscut saw, a rip saw, a back saw, a coping saw and a compass saw.
- NOTE : Drawing titled " COMPARING A crosscut SAW AND A RIPSAW " goes with this column.
- Crosscut is very easy but the ripping cut is a little bit difficult with some burning smell.
- Basically if you just want a 90 degree crosscut sled, make one.
- The teeth of a crosscut saw are filed so there is an angle or bevel on the front of each tooth.
- A crosscut can saw wood.
- It's difficult to find crosscut in a sentence.
- I am planning to buy the crosscut blade also.
- If you want a smooth finish, especially on a crosscut, this blade will do the job.
- This will allow you to rip or crosscut lumber and composition board.
- He still emulated the original guitar styles, mimicking Albert King's epigrammatic stingers in " crosscut Saw,".
- We have this shredder and a pricier fellowes 12 sheet crosscut shredder.
- Whether checking square on cabinets, or using it for a crosscut guide, this is nice to use.
- The crosscut fries were a perfect side.
- You want a different blade if you want a clean finished crosscut though.
- A "'crosscut saw "'( thwart saw ) is any saw designed for cutting wood perpendicular to ( across ) the wood grain.
- Individual vents for basalt volcanism include small cinder cones, volcanic plugs, and gabbroic feeders, which locally crosscut lava flows.
- This is a great value for 12 sheet crosscut shredder.
- Second : Set up the saw for a crosscut.
- In places, the grabens appear to crosscut the normal faults, indicating that the grabens are younger.
- Villages were also crosscut by tax obligations to different lords.
- In another course on forestry techniques, students use a two-man crosscut saw and extract the timber with horses.
- The micro cut pieces are more secure than the crosscut ones.
- Before showing up I was a little unsure what crosscut ribs were exactly.
- I can crosscut VG Fir without any tearout top or bottom when this blade is newly sharpened.
- A crosscut is located at Muruvik, close to the quarry.
- Most cross-cutting is done with a shop-made crosscut table.
- A buck saw is also a form of the crosscut saw.
- Two drives at right angles to the crosscut were planned to lead to the chambers.
- Crosscut is a fast paced tale full of intrigue, suspense and frequent plot twists.
- A carpenter's crosscut saw ( it should have 10 to 12 teeth per inch ) is adequate for cutting sheet or tube stock, but hacksaw or a keyhole saw with a fine tooth blade will give a smoother cut.
- It truly makes excellent crosscut and ripping cuts.
- This paper introduces the overall design of the crosscut machine on crystallite glass line and design of the ultrahigh - pressure cutting.
- They are available in crosscut and strip cut versions.
- With a crosscut saw, you'll be filing at a 45-degree angle.
- I even crosscut some material for the heck of it.
- How smooth can be crosscut in birch plywood.
- They hacked out the trail with axes, crosscut saws, shovels and picks.
Similar words: Crossway, Crotonic, Crocodylidae, Crockpot, Cross Division, Croner, Crotalinae, Crossen, Cross Check, Croppers, Crowfeet, Crosnes, Cross Invite, Cross Examination, Croy, Crock Pot, Crouchback, Crotaphytus, Cross Ply, Cross Joined