clamp use In A Sentence
Learn how to use clamp use in a sentence and make better sentences with `clamp use` by reading clamp use sentence examples.
- This little jig is hard to clamp, and moves a ton when in use.
- Just remember to use a wet cloth to remove any 'squeeze out' after you clamp.
- And once you get use to using the clamp you can set it up fairly quickly.
- Maybe in the new model they'll use a some type of spring loaded clamp.
- A clamp is a tool you use in a workshop.
- Clamp them together, being sure to use scrap pads to avoid denting the wood.
- I have overcome this with a small metal disk shaped weight I use in lieu of a clamp at times.
- The clamp is good quality and easy to use.
- I didn't get to use the clamp feature more than once, but its convenient.
- There is a thumb screw to use to tighten the clamp force on the wire for stripping.
- However, I suspect it will get more use as a general purpose hold down clamp.
- After almost five years of heavy use, a plastic clamp that holds the extension, broke.
- I use them for everything, even when I don't need hose clamp pliers.
- The clamp could be a little easier to use but once you figure it out all is good.
- Draw the material from ripe porcine sinoatrial node and use them for cell primary culture. Observe the primary cultured cell, and record the electrophysiological characteristics by patch clamp.
- The clamp to reduce the loop for the head is easy to use.
- I basically use them for a quick clamp when ripping plywood.
- Methods: use in situ hybridization and patch clamp techniques.
- They use top of the line materials and weld every joint, not just clamp it like most places.
- I have tried to use this strap clamp on multiple projects and have not had any success.
- At USD40 and to not include a clamp to actually use it.
- He invented an improved burette which had a tip at the bottom and a clamp ( a'Mohr's clip'), which made it much easier to use than its predecessors, which were more similar to a graduated cylinder.
- In a pinch you can use a filler block and use a two by two to make a clamp with these.
- You can use the clamp from the Master System with the Jr.
- Clamp in place, or of you have galvanized pipes or a cast iron sink, use the magnet.
- In use the banding clamp is adjusted before gluing to a diameter slightly larger than that of the assembled segments.
- Have had an opportunity to put to much use yet but it seems to clamp tightly and hold work securely.
- If in a hurry, one can use just the nearest clamp instead of locking both down.
- Open the clipboard and use it to clamp down the knotted ends.
- I gave the clamp 4 stars instead of 5 only because the gear mechanism is a little awkward to use.
- The clamps are designed to use 2x4s for the length of the clamp.
- This pipe clamp is strong, easy to use and well built.
- Depending what you are joining you need to use either one clamp or the other.
- Simple to use, no frills clamp.
- My way of doing this was to use a spring clamp to attach it to the hose.
- While it makes a great clamp I use it for a circular saw guide most often and it is great for that.
- The previous power adapters really were difficult to use, but these new clamp designs work great.
- Use clamp ampere meter to measure the current and check if the heating power is normal.
- Works great with my clamp meter so that i can get readings of the wattage devices use.
- The clamp requires the use of an allen wrench to adjust.
- Then use these to clamp the base boards to work table surface.
- Clamp the molding on a flat surface and use a coping saw, held vertically, to cut along the profile and remove the mitered section.
- The Chain Connect clamp designed for three functions. Not only can remove and install the chain connector, but also can remove the internal retaining rings of the BB30. It's quite simple to use it.
- I can use a clamp on the fence, but hardly enough room for the clamp and the featherboard.
- This was rectified by use of a small hose clamp below the device.
- The hold down clamp could be easier to use.
- You know those things that carpenters use to clamp down wood when they are sawing it.
- I clamp the saw to my workbench and fold the saw for storage underneath when not in use.
- They are still plenty strong and provide a lot of clamp force while being easy to use.
- After about 6 months of moderate use the clamp system broke.
- No clamp on it so it is extremly hard to use and not burn your hand.
- The slide and clamp locking system for the sanding sheets was very intuitive and easy to use.
- Speaking of those arms, they use a patented clamp system and have no play in them.
- The clamp is easy to use and makes for diversity, the music nice and loud.
- I hang the motor from a clamp on the bench and then use the flexible shaft relentlessly.
- Nice not to have to use the little wrench to clamp down on the different bits.
- Whether you need just a clamp or intend to use this as a guide rail, the True Grip is the way to go.
- I bought the clamp to use it, so I replied, well we are gonna at least try it.
- If you have a short span, use a cheaper clamp or adapt the 50 and 60 inch Bessey.
- Easier to use than the channel locks and you won't crush your fingerswhen they clamp together.
- And it is not at all difficult to use, it's basically like using a bar clamp.
- It is easy to use just open the clamp, slip over the tarp and close the clamp.
Similar words: Classism, Claimable, Clawless, Clause, Classroom, Clarification, Clarkston, Clar, Cladophoraceae, Clavicylinder, Cladoniaceae, Clamorous, Classic Country, Clayman, Clarifiers, Clamors, Clarithromycin, Claim, Claim To Fame, Classical Logic