chisels In A Sentence
Learn how to use chisels in a sentence and make better sentences with `chisels` by reading chisels sentence examples.
- He chisels wavy patterns similar to those on the paintings on rocklike forms or leaf-shaped blocks, then adds glittering splashes of gold.
- It's very well balanced and doesn't smash up the butt ends of your chisels.
- New chisels and plane blades need to be sharpened before first use.
- HSS drill bits , auger bit , drillsconcrete core drill bits and chisels, masonry drills.
- Great chisels for a serious hobbyist.
- Just make sure you pick up a set of QUALITY chisels to cut your mortises.
- And best of all, straight chisels are the easiest wood carving tools to sharpen.
- When that one's dull I touch up the edge on both chisels.
- Angels roamed the hallways with hammers and chisels, feverishly writing on the walls.
- Chisels well, drills very well too.
- In Mexico, Colombia and Peru the cutting of friable stone with tough volcanic hammers and chisels, as well as rude metallurgy, obtained, but the evidences of smelting are not convincing.
- For this purpose a horizontal bar Shaft armed with vertical cutting chisels is used, which cuts boring.
- Chisels have tapered blades, not flat blades like planes.
- They aren't GREAT chisels, but they work fine for me.
- Like ALL new chisels, these require some honing and preparations before use.
- I was shocked to find it came with a package of 4 or 5 chisels and tips to boot.
- "But then I realized I couldn't unless I understood what he did, so I bought some limewood and chisels and began, just like that .".
- It's not ideal for my big timber framing chisels, but it's much better than storing them loose.
- I use this primarily on wood, but also use as a flat stone to sharpen my hand chisels.
- For most chisels and planes, that is not necessary.
- I've used it on my chisels and block plane blades.
- Screwdrivers for chisels, back of wrench for hammer, etc.
- The carving is done with hand chisels, at a bench in an open-sided room alongside the cowshed.
- On the larger chisels it slip once, but once corrected it was fine.
- I have tried knives, screwdrivers, chisels, and scissors.
- It keeps your chisels from rolling off the workbench when you set them down.
- Manual tools like graving chisels, burins, and blades can carve detail into the surface of the jins or shari, since real or simulated woodgrain is an important characteristic of deadwood on a bonsai.
- Unfortunately, also in chisels, moldboards and disks.
- Great way to finish off honing your cutting tools, brings chisels and blade irons up a treat.
- Probably an hour and a half to get these chisels razor sharp and ready to go.
- Being SDS Plus, I was able to use all my drill bits and chisels from before.
- I ordered a set of Irwin chisels for just a few dollars more and what a difference.
- I was wanting a set of 'good' chisels for a while now.
- They used chisels to scrape the salt off the rocks.
- We buy extra fines, wide and chisels and fine and ULTRA fines even.
- They go using mallets and chisels, and ten to one they'd extend the fracture line.
- Two, the plastic coating is hard to remove from new chisels.
- I probably should have known that for the price, these could not be fantastically good chisels.
- Once my chisels were sharp, this machine allowed me to make easy mortises in the hard oak.
- I purchased this product to sharpen chisels and plane irons.
- The tool rest is limited to turning tools and plane irons no chisels here.
- I have found that these chisels hold an edge for a good while.
- The basic lifeway remained similar with the same bone harpoon heads, spear points, chisels, awls, and ornaments used.
- I am attempting to become better a sharpening my chisels and plane blades.
- My suggestion would be to start with the Marples chisels.
- It could be me, it could be my cheap chisels, it could be the honing guide.
- I will make something to prevent this and to store my chisels on as well.
- My chisels have tapered sides, but too thick to bed down in the groove.
- The stop mechanism works great, it's sturdy, and the chisels that come with it are plenty sharp.
- Make sure you have sharp chisels and saw.
- Firmer chisels have a stout blade that is rectangular in cross section.
- I find this weight to be just fine for mortising in red oak and is easy on my chisels.
- I myself am looking for a guide for my firmer chisels to add to the accuracey of there edge.
- This is the first set of decent chisels I have owned.
- I'm still using the original chisels and haven't sharpened them.
- In her current manifestation she chisels gargoyles out of stone with great frenzy and great skill.
- It comes very sharp and all the chisels are easily sharpened.
- But I wont use it on any of my fine chisels.
- The absence of good bark, dugout timber, and chisels of stone deprived the whole Mississippi valley of creditable water-craft, and reduced the natives to the clumsy trough for a dugout and miserable b
- I ordered two smaller chisels and a pointed tip at the same time as I bought the soldering iron.
- Siebenmorgen carves each piece with hand chisels and a small power tool.
- There is also a customer picture that showed someone getting four chisels.
- Amateurs and professionals alike use them as pry bars, chisels, punches and scrapers.
- It packs a good balanced punch that won't destroy the butt ends of your chisels.
- But I would spend the extra $100 and get some well made, medium quality chisels or better.
- Rockler sells a nice touch up stone for mortising chisels.
- Keep the plastic covers on when changing the chisels.
- I use them for initial sharpening of my chisels and I am happy with them they do the job.
- I use it with chisels.
- A safety clip or retainer must be installed to prevent attachments, such as chisels on a chipping hammer, from being unintentionally shot from the barrel.
- YOU WANT TO SHARPEN chisels.
- He uses only chain saws, no chisels or other tools.
- It turns out the steel is much too soft for this these are really carpenter's chisels.
- The engraver, who is very rarely the designer, then cuts the otitlines into the block with a knife, afterwards removing the superfluous wood with gouges and chisels.
- Now, I use chisels and feel it slice the fiber instead of tear it.
- I dont like chisels or suction noises in my mouth.
- These wood lathe chisels are really nice for the price.
- Then I hit my chisels with it.
- These chisels are very sharp and durable.
- He chisels off a piece of this mysterious stone and takes it back to the surface.
- I use it for plane blades, chisels, turning tools, and all kinds of other gentle grinding uses.
- This can be used to advantage on many tools such as chisels.
- Do-it-yourselfers who want to expand their tool collection may find butt, pocket and mill chisels in specialty shops that cater to professional cabinetmakers.
- Don't bother buying extra chisels for this tool.
- Unlike knives and chisels, scissors have only one cutting bevel.
- I wanted a general set of woodturning chisels to start me out.
- I pared end grain pine out of the box with each of these chisels.
- It's difficult to use on chisels due to one jaw being curved on the chisel side.
- However, I've used it for chopping with wood chisels, and it's done what its supposed to.
- I have used Bosch chisels and cheaper brands.
- I've read other reviews about the quality of the chisels provided with this mortiser.
- They are designed with flexibility in mind so don't expect them to double as plastic chisels.
- This 8 piece set of Benjamin's Best lathe chisels is a great set for the beginning turner.
- Castings were not trimmed by filing or grinding, but by small chisels and hammering (P.R.T.
- The chisels they ship with it are junk.
- The Papuans are mostly ignorant of iron, but work skilfully with axes of stone or tridacna shell and bone chisels, cutting down trees 20 in.
- All the basic chisels are included.
- This is a nice mallet for the money and works well for wood carving and chisels.
- The problem lies, however, in the quality of the chisels.
- First meetings of the Professional Working Sections : Machine saws, chisels, plane irons, pliers and carpenters'pincers, tinmen snips, bolt clippers and mechanical hand tools.
Similar words: Chitlin, Chindwin, Chi, Chigoes, Chiana, Chinese Crested, Childing, Chitterlings, Chiselmouth, Chiba, Chivey, Chignons, Chickenhearted, Chio, Chirurgical, Chinkiang, Chitral, Chimane, Chicken Wing, Chiamdo